Please wait while message is being sent...





The P67T has a reach/lifting capacity of 6.7 m/400 kg.

Parallel crane performs two actions at once (retraction) and has a movement pattern that enables loads to be stacked high. The crane requires a lower oil flow compared to other cranes. This enables it to be operated at low engine speeds, which saves fuel and the environment and provides a more comfortable noise level in the cab. The crane has a lifting torque of 34 kNm.

As standard, it is equipped with a 3t rotator, FB160 grapple and CRV60 (2 lever/3 coordinate) valve block.


FTG Baltic UAB

+370 5 246 23 18


Crane P67T
Reach (m)  6.7
Lifting torque, gross (kNm) 34
Lifting capacity at max. reach (kg) 400
Slewing torque (kNm)  8.5
Slewing angle (degrees) 360
Rec. oil flow (l/min)  30–35
System pressure (bar) 185
Weight w/o grapple and rotator (kg) 620
Standard equipment  
Hydraulic valve Mechanical
Rotator (tonnes) 3
Grapple FB160
Optional equipment  
Work lighting, crane arm Yes
Winch (crane mounted) Yes
Radio-controlled winch Yes
Other options  
Valve options  
2-lever mech. Yes
2-lever lightweight assembly el. on/off Yes
PCL low-pressure servo Yes
EHC electric servo Yes
Radio control, crane Yes


File Name File Type File Size
FTG Källefall Crane P67T - Product information.pdf pdf 560 kB

Connect With FTG Group